How and how can I paint paving slabs?

Many believe that painting paving slabs, as well as curbs, is a futile and thankless task. However, this is actually not the case. High-quality paint for paving slabs will make the pavement more beautiful and at the same time extend the period of operation of paths and borders. In addition, if the untreated tile is too slippery, then staining can solve this problem.

Content:

• Staining benefits
• Rubber paint
• Benefits of Using Rubber Inks
• Practical qualities
• Staining technique
• Preparatory stage
• Paint application
• Conclusion

Staining benefits

Concrete tile staining has been used more and more recently. This procedure has recently been applied to extend the life of pavement tracks. Paint performs the same role as impregnation for pavers. It creates a layer on the surface that protects the tile from aggressive environmental factors.

Today, various types of compositions are used for coloring, among which the most popular are rubber, alkyd and polyurethane paints. These compounds make the tile not too slippery, reducing its destruction over time.

Rubber paint

If you still think, than to paint paving slabs, then it is better to choose a paint on a rubber basis. The composition of this paint includes acrylic polymers, which make the tile more durable and wear-resistant.

Benefits of Using Rubber Inks

Most popular rubber paint. Its main advantages:

• elasticity;
• resistance to wear;
• fire safety;
• resistance to harmful atmospheric influences.

Aesthetic qualities of rubber paint:

1. A variety of color palette. Therefore, it is easy to find a suitable option for garden concrete paths.
2. Uniform application of paint, resulting in a beautiful smooth surface. If there is a porous base on the tracks, you can still achieve the same smooth surface effect by double-coating the paint. Also for this purpose, a universal primer is applied before painting.
3. The formation of a protective film after the paint dries. Thanks to this, the outer layer of the tile will always be bright and beautiful. Therefore, if you want to walk among stylish garden paths, then rubber paint is your choice.

Practical qualities

After drying, the rubber paint promotes the formation of a protective layer that has maximum water resistance and anti-high characteristics. Therefore, any moisture and saline solutions cannot get directly onto the paving slabs. As a result, the use of a coloring composition of this type allows you to extend the life of concrete and garden paths.

A protective layer formed after painting will prevent the development of mold, fungi and other harmful organisms on the surface of the tiles. In addition, staining will make the tile resistant to sharp temperature fluctuations. Accordingly, this also helps to improve the performance of the coating.

The rubber-based composition is durable and resistant to detergent chemical components.In addition, it is quite economical - five liters of composition is enough to cover more than twenty meters of paths or borders.

Staining technique

Preparatory stage

Before you start applying paint, you should clean the surface of the tile from contaminants. Any dirt is fairly easy to remove with a brush and water. To obtain the best effect, you can use synthetic detergents or a regular solution based on soap. When cleaning the surface from dirt, it is undesirable to use too high a pressure of water, as this can wash sand from the cracks between the tiles, which will reduce their strength.

Use a brush to remove mosses. So that they do not appear again, it is advisable to periodically treat the surface with herbicides and various lawn mixtures. If you decide to use hydrochloric acid for cleaning, then after the procedure it must be washed off with plenty of water. Otherwise, colored spots may appear on the surface.

Residues of gasoline or diesel fuel should be removed with strong solvents such as solvent or white spirit. After the surface of the tile dries, a primer is applied to it. This is especially true when working with a porous base.

Paint application

Traditionally, rubber paint is not diluted. It is applied to the surface with a special brush, roller or spray. All work must be carried out at a temperature above five degrees. To get the most dense coating, it is necessary to apply several layers of the composition. Each subsequent layer should be applied only after the previous one has dried.

If cracks appear on the painted surface, then these places are painted over with a brush. As a rule, each layer dries within three hours, although the drying time depends on temperature and humidity. In addition, the instructions for the composition indicate the individual drying time. The entire tool you are working with must be rinsed with cold water before it dries.

Conclusion

Thus, staining is a useful procedure that will improve the performance properties of paving slabs and increase its aesthetic characteristics. The optimal composition for painting is a rubber paint based on acrylic polymers.

As an alternative to manual painting, you can purchase a ready-made colored tile. Dyes are added to the production process, thanks to which you can get a surface of any color.