Enamel XB-785 is an anti-corrosion agent that can be used to cover various surfaces to protect them from negative environmental factors. The properties of the paint are such that the tread layer created by it extends the life of the products, so enamel is used in everyday life and in industry.
- The composition and purpose of enamel
- Specifications
- Colors
- Storage conditions
- Consumption
- Drying time
- Features of the application of enamel
- Safety requirements
The composition and purpose of enamel
Enamel XB-785 - varnish (paint and varnish material), which contains polyvinyl chloride chlorinated resin, the base of the product. The composition contains organic solvents, plasticizers, other fillers. The composition also includes various pigments - for example, black paint is made with the addition of pencil graphite. Enamel is produced by the company "PKF Spectrum", is created in accordance with GOST 7313-75, has all the necessary state certificates and certificates.
The tool creates a beautiful and durable coating, and the scope of its application is diverse:
- building construction;
- technological baths, tanks;
- equipment of galvanic shops;
- containers for chemical solutions;
- equipment in contact with water, steam, air with high or low temperatures;
- Automotive industry;
- production equipment.
Enamel has a number of positive properties:
- profitability, low price;
- resistance to wear and stress;
- durability.
to contents ↑According to the standard, the product can be applied to surfaces made of concrete, reinforced concrete, metal. After processing, the products retain their performance even under the influence of chlorine, CO2, sulfur dioxide, the harmful effect of acids will be significantly reduced.
Specifications
The conditional viscosity of the paint is measured with a B3-246 viscometer and is 24-48 s. Technical characteristics of the product:
- the proportion of non-volatile compounds is up to 36%;
- adhesion - 2 points;
- coating elasticity - 1 mm;
- the hardness of the layer is 0.15 (coefficient).
Colors
The product is available in different colors - on the market are beige, gray, black, white, red-brown, yellow.
You can choose the color of enamel depending on the requirements and desires, but you should consider the features. So, the darkest paints are used for use in aggressive and outdoor conditions, light - for indoor use.
to contents ↑Storage conditions
Paint is stored only with a tightly sealed lid, away from sources of fire, heat, in a dry, dark place. Storage temperature - from plus 30 to minus 30.
to contents ↑Long-term storage leads to an increase in viscosity, this does not cause a violation of properties. Solid particles can settle in the enamel, pigments peel off, but with stirring, the properties are restored. After opening, you can store the enamel XB-785 only six months.
Consumption
Observing all the conditions for applying the product, its consumption rate per 1 m2 will be 125 - 150 grams. This indicator is indicated for a single coat of paint with air humidity during application up to 80%.The required layer thickness is 60 - 100 microns.
Drying time
At a temperature of 20 degrees Celsius, the paint dries in an hour (to degree 3), complete drying (degree 5) occurs in a day.
Features of the application of enamel
For enamel dilution, the solvents stated in the instructions - P4, P4A, can be used. Before staining, a comprehensive surface cleaning should be done - remove dirt, dust, clean rust, degrease with white spirit. It is acceptable to use sandblasting units or cord brushes. Further, the surfaces should be primed 1 - 2 times depending on the degree of wear (use primers XC-068, 010, 059).
Staining is done with a brush, spray, roller. Pre-enamel is thoroughly mixed. Moisture should be excluded, work is carried out only in a dry room or above the dew point. Layers are applied every hour, usually 2-3 layers are enough.
to contents ↑
Safety requirements
The paint is highly flammable, contains toxic compounds (lead and others), so it is important to be careful when working. The room must have ventilation, the employee must wear a suit and a respirator. To avoid a fire, sand and fire extinguishers should be nearby. In everyday conditions, do not neglect such rules - then harm to the body and dangerous consequences will not happen.
