A novelty appeared in children's art - volumetric paints. This material allows you to apply original images, which after drying take on volume. Paints with a 3D effect can be done with your own hands, this will require only simple components that everyone has at home.
How to make stuff
"Chubby" paints for drawing - a popular lesson in the DOW. With their help, you can create interesting pictures that the child will like. Paint recipes are especially useful for those who are already bored with gouache and watercolor painting. Material for creativity can be made at home according to one of the recipes below.
Foam paints
The cosmetic product has an unconventional use - it is suitable for creating children's volumetric paints. To prepare them from shaving foam, you must take:
- foam itself - 2 parts;
- PVA glue - 1 part;
- any color (food, gouache).
It is enough to mix glue and pigment, dissolve the latter well so that there are no streaks left, then add foam. The finished product should turn out to be voluminous, so mix it carefully.
Puffy flour paints
This recipe is also simple. It is necessary to prepare the following components:
- pancake flour - 1 part;
- salt - 1 part;
- water;
- dry pigments.
The easiest way to take colors from Easter sets, they have a rich color, give very bright colors. If there is no pancake flour, you can take the usual, although the first gives a more pronounced volume. First you need to combine the flour, salt, mix. Then you need to add water to a tablespoon so that the mass is like thick sour cream. It is poured into glasses, pigments are added.
To create luminous paints take fluorescent dyes, which are sold in office supplies, supermarkets. Instead of salt, a baking powder is needed, it is mixed in equal parts with flour, water is added in small portions, after which color is introduced. The difference with ordinary paints is as follows: luminous is painted in the dark with the UV lamp on, so that fluorescent dyes begin to appear.
Volumetric painting
For drawing you need cardboard, thick paper, thick disposable plates. You can also work on the fabric, but it also should not be too thin. First you need to prepare a sketch - a sketch of the drawing, then you can draw lines with volumetric paints on it. Do this in the following ways:
- Cotton swab, brush. These are the easiest methods that do not require special preparation. You just need to take inventory, start the creative process.
- The envelope. You can make an envelope from a file (multifor). The file is folded diagonally; one side is sealed with tape. The necessary amount of paint is placed inside, tied with clerical gum. The tip of the file is cut off, after which the material will be easily extruded.
- Bottle. Take a thin plastic bottle of clerical glue with a nose, fill with paint. Apply for drawing.
Smears are applied generously to the paper without saving: they should be juicy, bright. After completing the picture, it must be dried. If foam and PVA were used to create the materials, the drawing is simply placed for drying for 3 hours on a flat surface. Flour paints are dried in the microwave for 10 seconds at maximum power. After turning off the device, you can notice that the picture has increased in volume, has acquired a 3D effect. She will look original, beautiful, which will surely interest the baby!
