Polyfoam (styrofoam, polystyrene) is a cheap material that many people prefer to stick to the ceiling to create a beautiful budget coating. The tile is white and colored, with seams and seamless. To get a good result, you need to buy high-quality adhesive for the ceiling tile made of foam. Consider what is the best glue to use for this purpose and what are the main properties of the adhesive compositions.
- Tile Adhesive Requirements
- Types of glue
- Clay Titan
- Product Features
- How to breed material
- Master
- Moment
- Eltitans
- Polyvinyl acetate glue
- Liquid Nails
- Acrylic Putty
- The best tile adhesive
Tile Adhesive Requirements
The choice of adhesives in decoration stores is great. Tile glue must meet certain standards, requirements, only in this case it will reliably hold polystyrene material. Here are the standards by which to choose a tool:
- Moderate viscosity. The glue should be thick enough, not too viscous, but not liquid. If the glue's consistency is liquid, it will not hold even the lightest polystyrene foam tile. It is inconvenient to apply too thickened glue, the consumption is too high.
- Good adhesion. High adhesive properties allow the tile to firmly adhere to the surface of the walls and ceiling.
- Environmental friendliness. High-quality glue for foam panels does not contain additives harmful to humans, solvents.
- White or transparent color. Most types of tiles are white, so the adhesive composition should not stand out with a darker shade.
- Convenient drying speed. The surface of the ceiling should become dry in a short time, because it will be difficult to hold foam tiles with your hands for a long time.
- Economical price. If the new ceiling will have a large area, then it is unprofitable to acquire expensive compositions. Glue should have an optimum ratio of price and quality.
- Universality. Such adhesives are suitable for all surfaces - they easily glue tiles to concrete on the ceiling, on plasterboard floors, and other materials.
Types of glue
Adhesives for ceiling tiles can be of different categories. The main ones are:
- universal polymer;
- liquid Nails;
- acrylic putties;
- polyvinyl acetate adhesives.
Depending on the base, the agents are based on solvents, water based, hot melt adhesives, compound adhesives. Water-based products are the cheapest, but they will dry longer than others. Also, such adhesives can not be used at low temperatures. After installing the plates in such adhesives, fungus and mold often settle, so you will additionally have to cover the ceiling with a special composition.
Adhesives on solvents dry very quickly, they are liquid polymers. The composition of hot melt adhesives includes thermoplastic polymers, so they must be applied after heating to a certain temperature. Adhesive compounds are kneaded, applied quickly, as they dry in a few minutes.
Clay Titan
Clay Titan is very popular among builders, it is made on a polymer basis. With its help, it is possible to stick polystyrene foam material, plastic coatings onto concrete, gypsum plasterboard, plastered, another type of ceiling. Among other things, "Titan" glues glass, paper, wood, ceramics.
to contents ↑There are several types of this tool. It is best to buy a universal adhesive "Titan", which is squeezed out of a durable package with a thin layer of a dispenser. The composition is transparent, has good indicators of heat resistance, moisture resistance, quickly sets. The material dries completely in 1 hour; less than a minute is needed for the initial setting. Also on sale is glue mastic "Titan", it is bought if the ceiling has large irregularities.
Product Features
"Titanium" is resistant to stress, it is elastic, not fragile after solidification. It can be operated in conditions of high humidity, temperature. Consumption is economical. The product does not contain harmful components, it is safe for humans. Here are the main technical parameters of universal glue:
- layer thickness - 4 mm;
- weight per 1 square. m - 4.5 kg;
- tensile strength in the transverse / longitudinal direction - 400/600 N;
- heat resistance +140 degrees.
How to breed material
If the glue is too thick, it can be diluted. You can dilute Titanium with medical alcohol. Dilution will make the composition more smear, convenient to use, it will better penetrate small cracks. You cannot pour too much alcohol, as the drying time will be longer.
The universal composition is applied with a dashed line on the tile, after which it is allowed to dry for a minute, the material is pressed to the ceiling. It will dry for about an hour, the final polymerization takes place in a day. How to apply glue mastic? It is applied with a spatula to the plates with dots - in the center, 3 points on each side. The tool will seize in literally 20 seconds, completely dry in 12 hours.
to contents ↑Master
When choosing how to glue the tiles, some dwell on the composition of the "Master". Its characteristics, in comparison with the Titan, are worse, but the price is lower. In order not to hold the tile for too long on the ceiling, you need to apply the "Master" on the coating, soak for several minutes, then attach to the ceiling. Unfortunately, the smell of this material is rather unpleasant and sharp, you will have to carefully ventilate the room. Drafts should not be allowed - they impair adhesion, and the tile can even move after 1-2 hours.
Moment
Clay "Moment" is of excellent quality, very securely attaches polystyrene to the ceiling, dries quickly. To use it you need to buy a special glue gun. The rise in price of repairs will also occur due to high consumption, high prices, so gluing the “Moment” tile is rather disadvantageous.
Eltitans
The manufacturer of this tool is located in China. It has a high popularity among users. "Eltitans" allows you to glue the tile to any surface - concrete, plaster, wood, you can also use the adhesive composition for other needs. It perfectly holds together parts made of ceramics, glass, leather, mosaics. The product is frost-resistant, waterproof after drying, the seam will be durable and highly elastic.
Polyvinyl acetate glue
Polyvinyl acetate materials are almost odorless, and working with them is very simple. But the expense will be high, because the plates and ceiling will have to be smeared. Therefore, you will have to buy material in a large bank, which is quite expensive. Due to the double operation, the overall time consumption is significantly increased.
Liquid Nails
Glues of this type are in great demand for any finishing work. With the help of liquid nails, you can not only glue the plates, but also repair joints, seams. To use them, you will have to purchase a glue gun, which will help squeeze the glue in the right doses.On the surface of each square, dot smears are applied in the center and along the edges. If the base is uneven, an order of magnitude more is applied to align the ceiling. You should step back from the edge so that after pressing the tiles the glue does not squeeze out from under them.
Acrylic Putty
This method of sticker material is used less often, but it is no less effective. The putty is viscous, reliably holds polystyrene foam products. Even thin thin seamless tiles can be glued with acrylic putty; the product will not shine through. A thin layer of the product should be applied to certain parts of the square, immediately pressed to the ceiling and fixed in the desired position.
The best tile adhesive
Understanding the choice of adhesives can be difficult. At a price, the Moment is the most expensive, followed by the versatile Titan. The remaining funds are in a lower price category. So which glue is better to use? Professionals prefer to buy liquid nails with universal properties. If they are water-based, they are completely safe for humans, although they have a higher price.
For the bathroom you will have to buy liquid nails with solvents, since only they have sufficient moisture resistant properties. It is important to apply any glue correctly, according to the instructions, and then the result will please!
