Paint is one of the most common building materials, which has not lost its relevance for many decades. But working with it almost always leads to sagging or contamination, which must be removed subsequently.
- Removing smudges and stains
- Mechanical way
- Surface treatment
- Work execution technology
- Chemical way
- White spirit
- Liquid oil
- Solvents
- Acetone
- Thermal method
Most often, with the help of paint, we put in order the window and door openings, and for sure everyone who at least once in his life painted the frames or walls of the house on his own made mistakes that resulted in dried paint on the glass.
Despite all the precautions and even with the utmost care, no one is immune from the occurrence of stubborn stains, sloppy strokes or smudges while painting surfaces with their own hands.
It's obvious that paint spots differ from stains of ordinary dirt and therefore it is impossible to get rid of them by using water, soap or other detergents. It is impossible to wash off the paint with plain water, and other cleaning products will not particularly help in this matter. You can clean the paint from the surface of the glass using several well-established methods.
to contents ↑Removing smudges and stains
Smudges and stains from the glass surface can be removed using several methods:
- mechanical;
- chemical;
- thermal.
Mechanical way
Mechanical impact is a time-tested and reliable way to remove paint from the glass surface. This option does not require the use of chemical-based products or special tools and can equally well be used both to remove fresh stains and long-dried paint. The mechanical method is considered the simplest, but ineffective option, which can only be used to work with small surfaces.
to contents ↑
Surface treatment
The place where the paint has got must be well treated with any product with a degreasing effect. The role of such a tool can be alcohol or any other special tool for cleaning alcohol-based glasses. After surface treatment, in this way, a soft, lint-free rag soaked in hot water or even boiling water is applied to the smudge or stain.
The fabric must be fixed so that it adheres well to the surface of the glass. This can be done using tape. In this position, it should lie for at least 15-20 minutes. At this time, you can even pour a little hot water on top of the fabric in order to maximize the effect on the paint.
to contents ↑Work execution technology
After the paint becomes a little softer, you just need to scrape it off the surface with a special stationery knife or blade. The cutting, sharp edge of the tool must be applied as accurately as possible to the surface, well pressed and gently remove the paint layer.
to contents ↑Thus, every centimeter of the contaminated glass surface is gradually cleared. Residues of paint and dirt can be removed with soap and warm water.
Chemical way
The chemical method of cleaning paint is considered to be the simplest and most effective, since it makes it possible to quickly, simply and efficiently clean even the largest glass surfaces from the oldest and difficult to remove stains and dirt.
Today, a huge assortment of various chemical cleansers is on sale. The cost of such materials, as a rule, is quite affordable, but when buying it is best to check with a consultant first whether such a tool is suitable for working with glass surfaces.
To clear the paint from the glass surface, use:
- White spirit;
- liquid oil;
- special solvents;
- acetone.
White spirit
One of the most popular and often used methods for removing impurities from the glass surface is white alcohol. When working with this tool, you must try to be careful and try not to get on the skin or mucous membranes, since even a small amount of this tool can cause burns or allergic reactions. It is also necessary to avoid getting this substance on clothing, as it can easily leave stubborn stains or damage the fabric structure.
A small amount of the product is applied to a piece of cotton wool or gauze and applied to the area contaminated with paint for no more than 30 seconds. This time should be enough so that the paint easily moves away from the surface.
Not time to dissolve areas can be removed with a knife or blade. If necessary, you can repeat the procedure.
Liquid oil
No less effective means for removing paint from glass is liquid oil. To do this, a piece of cotton wool is impregnated with a product, fixed on the surface of the glass and remains on it for several hours. After a while, the product is removed using a solution of soda or turpentine. Liquid oil can also be used to clean brushes that for some reason were not washed after use. They must be placed in a liquid and rinsed well with water after the paint is wet.
to contents ↑Solvents
In the assortment of construction stores, you can also find solvents specially designed for removing paint from the surface of the glass. When purchasing solvents, it is necessary to pay attention to what particular surfaces this product is designed for.
Work with solvents only with special gloves and respirators. They can not be allowed to get on the skin, organs of vision, respiration and mucous membranes. All solvents work according to a single principle - they soften a layer of paint that has dried on the glass surface, after which it is very easily removed from the surface. After using such products, the glass must be washed with soap and water.
Acetone
Acetone also copes with the task of removing old paint. The technology for using acetone is not much different from the previous ones. The cotton pad is wetted with a solution and applied to the surface of the glass. After a few minutes, the softened paint can be removed with a knife or blade. Wash the glass thoroughly with soap and water, wipe dry.
Thermal method
The thermal method is great for working with old and well-dried soiling. The essence of this method is to soften the base and deteriorate adhesion to the surface of most paints and varnishes under the influence of temperatures. To remove paint in this way, you need a regular household iron, a hair dryer, and plain foil.
Before using the thermal method, the glass is thoroughly cleaned using special means and wiped dry. The foil is fixed on a contaminated area of glass with adhesive tape.A stream of warm air or steam is directed onto the foil.
After a few minutes, the softened layer of old paint can be removed with a knife or blade.
Today, dried paint stains on glass are not a serious problem and can be removed quite easily, even at home. But it is best to try to protect the glass from paint or, immediately remove the paint that has fallen on them with the help of special solutions.
