How to age painted walls, wood or metal?

If you are a lover of old things or you just have nothing to update the interior in your home, you can easily use the antique painting method. A large number of things are suitable for antique painting. This furniture, and walls, and doors. In general, everything that gives your home a certain style.

Content:

• Wall painting
• Painting wooden products
• Craquelure
• Patina
• Features of door painting
• Coloring of metal products

Now it’s very difficult to buy antiques or furniture, and it’s expensive, which not everyone can afford. After all, before all wood products were made mainly from oak or other massive species of trees. Therefore, for their acquisition is not enough average earnings, which has the majority of the population.

And only antique painting is an excellent and fairly budgetary way out of this situation. In addition, there are a huge number of processing methods and techniques that allow you to achieve an excellent effect of aging with your own hands.

Wall painting

It is from this important stage that the transformation of your room begins. And the quality and further appearance of the room depend on it. First you need to clean the surface of contaminants, and most carefully walk through the partition. After processing, there should not be the slightest speck of dust and old coating on it.

All previous material must be removed from the wall so that it does not interfere with further work. It is best to use a spatula for this. In addition to it, prepare:

• paint;
• sponge;
• brush;
• primer for paint;
• sand paper;
• a brush;
• technical wax for walls

The source material is a clean wall, ready for any flight of fantasy, even the most impossible.

Next, you will need a special primer, which can be purchased at any store. After its dilution, you should not wait, but immediately apply it to the wall surface, since it has the peculiarity of hardening. After the primer has completely dried, you can start painting.

The paint must be selected in advance, moreover, one that contains latex. This paint is ideal for walls and is resistant to fading. Get a brush with a long pile. The paint must be applied in a circular motion. Moreover, periodically you need to press on the brush, as a result of which the effect of wear is created. That he will be the main sign of antiquity.

But that is not all. After all, painting the walls does not end there. After that, you need to properly wipe it. To do this, you need a brush with which to mash. Instead of a brush, you can use sandpaper or a sponge. The drawing of antiquity will completely depend on your brush movements. You can use all your imagination. In this case, experiments are welcome.

After waiting for the wall to completely dry, wax can be applied to it. It is applied with a sponge. Then, after waiting a few more hours, you can enjoy the fruits of your labor.All painting the walls with antique do it yourself is ready.

Painting wooden products

If you want to paint a wooden surface, whether it be a wall, a door or furniture, then first you need to process it. First you need to remove the old coating from the wood. After this, the tree needs to be cleaned and sanded with sandpaper, starting with a large one, gradually choosing a smaller one.

Then treat the treated wood with an antiseptic primer, which will protect the wooden surface from mold and rot.

To age a tree, it is necessary to produce a special method of painting:

1. Apply the first coat of paint. To do this, it is better to use matte acrylic.
2. After drying completely, rub the paint with sandpaper.
3. A second coat of paint is applied in a thin layer.
4. To most age the wood, you can rub individual places with sandpaper again.
5. Finish the work by treating the entire product with fine-grained sandpaper.

The process of painting wooden antique products with their own hands is over. This way of painting can age, both furniture and doors.

Craquelure

There is another way to age your own woodwork. It is called craquelure. It is achieved by the formation of thin cracks in the varnish. This can be achieved as follows:

1. On a previously cleaned surface, apply a coat of paint of the desired shade. It is this color that will crack.
2. After it has completely dried, apply a transparent varnish - craquelure.
3. When the varnish dries, apply another coat of paint with a color significantly different from the previous one. After which the varnish will begin to crack.
4. At the end of the colorful work, coat the wood with ordinary clear varnish.

Patina

Another way to age wood is patina - special paintapplied to any wooden product. It is very simple - apply a varnish on the surface of the wood based on polyurethane or polyester. A patina lies on it with a thin layer.

After drying, treat the product with a metallized sponge. The aging effect depends on the intensity of the treatment. At the end of the work, everything is varnished.

Features of door painting

The door painting process has some features:

• first you need to remove all the old paint with a spatula;
• unscrew hinges, locks, handles and other parts available;
• wash the entire surface of the door from accumulated dirt and dust;
• sand the door with sandpaper;
• carefully fill all cracks and scratches.

If the preparation process is completed, you can proceed directly to the painting. First, decide on the color. After obtaining the desired color scheme, cover the entire surface of the door with a stain. To do this, take a swab and cover the tree several times until the desired shade is obtained.

To give the product an old look, make scuffs in the corners, at the keyhole and handles. This can be done with a metal brush. After that, cover the entire surface with colorless varnish in several layers. When the door dries, reinstall all removed hardware in place.

Coloring of metal products

Such technology is less in demand, since there are much less metallized products than wooden ones. Therefore, in order to age the metal, one can also resort to craquelure treatment. And so that the effect is more pronounced, you can emphasize the resulting cracks burnt umber. It must be applied until the composition has completely dried on its specific areas. Mandatory condition that the umber was only on cracks.

Given the fact that the color scheme of the metal is very diverse, the surface can get a shade from gold to brass. Therefore, when processing it with craquelure, it takes an old look, and maybe even an antique one.

To obtain the aging effect, you must first coat the product with metallized paint. Then a primer layer of craquelure is applied with the obligatory observance of all instructions, without smudges and even layer. After drying, apply the first coat of craquelure with a brush. When it begins to dry, small streaks will appear on the surface.

The thicker the varnish layer, the larger the cracks. Finally, coat the surface with a layer of colorless varnish.

In conclusion, we can conclude that old-fashioned paint is available on any surface of different ages and conditions. The main thing is to have a desire to do everything with your own hands and fantasy. Create, and the result will not be long in coming.