How and how to paint the plastered walls?

For comfort in the room, after plastering, it is not necessary to glue wallpaper or putty on the walls, it will be normal to simply paint the entire area. Usually, such repairs, where the plaster is painted, are carried out in several cases:

Content:

• Dyeing tool
• Acrylic paints
• Latex compounds
• PVA-based water-based paint
• Oil and alkyd paints
• Wall painting
• Conclusion

• if the office is painting the plastered partitions and walls, this room does not need wallpaper;
• if this is a large production area, then somehow the wallpaper and putty in this room will be inappropriate.

You can draw the appropriate conclusions and confidently say that painting plastered surfaces will be relevant in the place where the premises need to be given an aesthetic appearance without any financial costs and a small amount of time.

Dyeing tool

At present, it is difficult to say which paint is better to use after plastering, as it may be that paint for the interior walls of the house will not work in your case. The main thing is to pay attention to the fact that the same paint can have qualitative differences. This is mainly manifested in the brightness and saturation of its shades, or in consumption per 1 sq. M.

Typically, the quality of such material depends on the manufacturer and pricing policy. But this does not mean that it is necessary to purchase the most expensive paint. For starters, it’s best to consult with sales assistants to help you find a middle ground.

Acrylic paints

Acrylic-based paints are a good and quite popular material among the people. It is used for coloring living rooms and rooms with high humidity.

Such compositions have the following characteristics:

1. They respond well to evaporation, which is why during operation they can be cleaned with wet wipes without any problems, their aesthetic appearance will in no way be spoiled;
2. For tinting, manufacturers have released a wide range of different shades and colors, thanks to such quality the coloring composition can be found under any interior of the room;
3. After applying the composition to the plaster, the walls of the house will have a matte surface;
4. The material, which is made on an acrylic basis, is affordable, in the trailer it is the “golden mean” between quality, modern technology, production and price.

There are nuances to which you should pay attention. This type of paint is not recommended for purchase for those rooms in which there is a risk of liquid getting on the walls or ceiling. This can safely include bathrooms, facilities for washing cars. For contact with water, it is best to choose coatings designed based on latex.

Latex compounds

The main point of working with this type of dyes is to dry the material, which is gradually converted into a thin but strong film layer. Due to this property, you can perform wet cleaning in the house, as well as from the outside, because all compositions made on this basis are not afraid of direct liquid.

The composition of this paint has both a glossy and a matte surface, which is well suited for painting plastered walls. If the wall has decorative plaster, then it is the latex composition that is most suitable for it, this is because no other material can isolate the volume and texture of this type of putty pattern.

PVA-based water-based paint

Aqueous emulsion ink based on PVA is a rather convenient option for painting walls in a “cheap and cheerful” style, and with a good appearance. Although this water emulsion is not rich in a choice of colors, it is simply created for a room where there is no need for a special design and color saturation. The main thing to remember is that the emulsion material cannot be used in rooms with high humidity, as well as in places where it can be wiped with wet wipes.

Need to know! For color saturation, a PVA-based water emulsion must be applied in several layers. For a stronger effect, it is advisable to prime the wall of the house before work. Such an event, first of all, will enhance the adhesion of the paint to the plastered surface, as well as reduce the consumption of water-based composition.

Oil and alkyd paints

Such paints are characterized by color saturation and a durable layer after drying, but have some drawbacks. Namely:

1. Pungent toxic odor. It is difficult to work with such paint, and not everyone can. After it dries, there will be no smell, but even your neighbors will feel the paint during the evaporation process.
2. A small selection of colors and shades.
3. High consumption of paint and its high cost.
4. If you work with a roller or brush, the painting speed will be low.

In general, painting plastered walls with such materials is often used, especially in rooms with high humidity. The service life of such surfaces will be long and will not require intensive care.

Wall painting

In this case, in painting walls with any material, whether it is an aqueous emulsion or latex composition, outside the house or inside, you should remember some nuances, then your plastered wall will turn out beautiful and high-quality. The process of performing work:

1. Before painting the exterior or interior walls, prepare its surface. In this case, such preparation is one of the important stages before holding special events. Thanks to the latest technology, before painting, the surface can be cleaned using a special device, as well as putty or cement-sand mortar. If this is not done, then a "web" of cracks and chips will catch my eye.
2. With the help of a brush or roller, all dust and debris is removed from the surface, then its primer takes place, as mentioned above, all measures are carried out specifically to reduce the cost of materials. For such a coloring, you can use any acrylic based primer.
3. To choose a method of painting, you should focus on the paint used, or what features this structure has. If an alkyd compound is used in the process of work, and this is a production building, then there is no way to do it with a spray gun. When all these activities are carried out in the living room, it is best to use a brush or roller for painting.
4. Paint preparation. If we are talking about alkyd or oil paint, a solvent is used to achieve normal thickness, if the composition has a water-based material, then in this case you will have to resort to color saturation before you can achieve a good result with the paint.
5. Painting outside or inside the house on the surface is carried out by a roller, all movements are performed "from top to bottom." With this work, the inner or outer wall will look in the same tone.

Need to know! Whatever you work with, with a roller or spray gun, it is advisable to cover all surfaces with foil, so as not to stain the furniture and all other things that are in the room.

Conclusion

This article examined the methods of painting the finished plastered plane and the process of performing this action, at home or on the street, on internal or external surfaces. Now everyone can buy a special painting composition and carry out all the necessary measures for painting the interior walls using plaster in their home.