icolorex.techinfus.com/en/LuckyTypes of varnishes

Scuba for processing lining - the choice of the optimal composition

The landlord makes the first right decision when he intends to use wooden structures for interior decoration. Despite the wide possibilities of using high-tech modern materials, wood is still in demand, and will be considered fashionable for a long time. The second right decision is to use scuba diving for lining.

Scuba lining treatment

Performance characteristics of wood material

One of the constraints in the application of this type of finish is the low performance of the raw wood lining. And that's why.

  1. Wood is afraid of moisture. When used in a wet state, the material rots, quickly lends itself to chemical decomposition.
  2. Under the influence of fungal spores, which easily reproduce on wooden surfaces, the wood turns into dust in a matter of months. In addition, the raw lining is a great place to live all kinds of bugs and larvae.
  3. The sun's rays adversely affect the appearance of the wooden coating, it loses its attractiveness - this is the so-called UV aging.
  4. The tree is not just easy to burn, it is considered fuel and poses a fire hazard to the room.

Timber blanks are sold in a state not treated with special protective compounds, sometimes the offered colors do not fit into the color scheme of the room. All these shortcomings can be eliminated due to a special coating for lining - scuba gear.

Lining before scuba diving

to contents ↑

The composition of waterborne varnish

The basis of scuba diving is water. It is its presence as a solvent that makes the solution harmless, allows the treated surface to dry quickly. The standard is the composition of the following ingredients:

  • water base;
  • micro wax;
  • substances for antiseptic treatment;
  • dispersion;
  • modifiers.

Different manufacturers may add their exclusive components.

Coating properties

The composition of the product determines its properties, the effect on the treated surface and the environment. Scuba diving for lining are widely used due to the following properties:

  • they contain no substances that are dangerous to humans;
  • a film is created on the treated surface, which protects the wood from moisture and dirt;
  • for outdoor work, varnishes are used, in the composition of which substances are added that protect the surface from sunlight and impart frost resistance to the coating;
  • the components of the solution do not emit an unpleasant odor, which allows you to perform work indoors;
  • antiseptic components do not allow the development of mold, fungus and bugs in wood;
  • varnish creates an elastic film on the surface, which does not collapse under the influence of internal deformation characteristic of the lining;
  • thanks to the water-based acrylic dye is easy to apply, without leaving smudges;
  • after processing, there remains a coating that allows air to breathe;
  • the composition does not contain components of organic origin, which eliminates rotting.
to contents ↑

Color schemes

The most widely used diving without color. They emphasize the natural texture of wood, give a rich shade and beautiful shine.

Options for Flower Water Varnish

A feature of scuba diving is the ability not only to emphasize the texture of the fiber, but also to give even cheaper wood the appearance of a more expensive coating. The colors of the aqualak are often indicated by the color of the tree that they imitate: fern, canadian nut, pear, cherry, apple tree.

to contents ↑

Coating

When working, it is worth considering some features:

  1. Scuba dives quickly thicken. It is allowed to dilute them with water during operation. In this case, the amount of added water should not exceed 10% of the volume of varnish.
  2. To obtain a high-quality surface during operation, it is necessary to mix acrylic scuba gear as often as possible.
  3. The composition is sensitive to temperature conditions. It can not be used at subzero temperatures and in high heat.

In order for the coating to protect the tree for a long time and at the same time have a beautiful appearance, the scuba gear must be applied in accordance with the instructions attached to it:

  1. First, the surface of the tree is cleaned of the old coating and dirt with a grinding machine or sandpaper. Dust is removed mechanically.
  2. Before applying aqualak, a primer is applied. The primer must dry completely.
  3. In the process, varnishes necessarily mix well. For application use ordinary tools: brushes and rollers. The applied layer must be very thin. After complete drying, apply the following. The third layer becomes the finish. After each layer, the surface is dried.
  4. Work begins with the painting of the slots of the lining, and then the adjacent surfaces are treated. Application is performed by movements from top to bottom.
    Diving spray lining

The properties attached to the tree during varnish processing allow the use of the coating in almost any residential premises. The high ability to resist moisture allows the use of coated wood in saunas and baths.

to contents ↑

Surface care

Lining after processing does not need special care. After coating until the polymerization process is completed, do not use detergents in the first month. After the required time has elapsed, the cleaning treatment can be carried out in the usual way.

Popular brands

To cover the lining, high-quality acrylic varnishes are produced. The most famous:

  1. Eurotex Aqualak has no color. It is used as a protective coating that strengthens the wooden surface, gives it the appearance of a valuable breed, adds resistance to dirt, moisture and dust. Additionally protects from sunlight and insects - tree pests. Creates a thin protective film on the surface.
  2. “Aqualak Premium” creates a colorless protective coating, has no tendency to crack, tolerates atmospheric effects, does not turn yellow over time.
  3. Czech products IMPRANAL in addition to protection from weather and sunlight make the surface pleasant to the touch. It is recommended to apply in rooms that need to be washed frequently during operation.
  4. Acrylic varnish from the Finnish manufacturer Teknos has additional qualities: it is vapor-proof and increases the resistance of coatings to mechanical stress.
    Different shades of waterborne varnishes

The use of acrylic scuba diving is a successful technological solution that allows wooden surfaces to give a beautiful modern look. In addition, after processing, a durable coating is obtained, inaccessible to moisture, sunlight and dirt, and the wood is well protected from pests and mold.Properly performed work will allow the tree to carry out its service for a long time to create comfort and improve human life.

Add a comment

Paints

Glue

Instruments