Most metals are very strong, reliable, but they can rust under the influence of a number of factors. To protect against corrosion, various methods have been developed that can be divided into two types - electrochemical and conservation. The advantages of those and others combines the tool "Tsinkar", which is very popular among masters.
- Rust removal agent “Tsinkar” - description
- Composition
- Application area
- Rust exposure
- Release form and consumption rate
- Instructions for use
- Surface preparation and application of the transducer
- Drying time
- Do I need to wash off the “Tsinkar” after application
- Primer and body protection after applying the converter
- How to increase the efficiency of use of the composition
- Safety requirements
- How to avoid possible failures
- Advantages and disadvantages of Tsinkar
- Application result
- User reviews
Rust removal agent “Tsinkar” - description
The rust converter "Tsinkar" was first released in 1993 by the company "Agat-Auto" (Moscow), which specializes in cosmetics, chemicals for cars. It is designed to combat rust on any steel substrates that are susceptible to corrosion.
Composition
The composition is based on phosphoric acid, manganese and zinc, the latter being present in the form of salts. All elements are selected strictly according to the developed recipe, otherwise the properties of the solution will change.
Application area
Best of all, “Tsinkar” has established itself precisely in the processing of steel, but it also works on other metals, alloys subject to rust. The main purpose of the application is the conversion and removal of foci of corrosion damage, as well as further protection of surfaces from atmospheric and climatic factors. You can use the composition on the machine to clean individual elements, as well as:
- other vehicles;
- roofs;
- garages;
- bridge supports;
- welds.
You can use it for domestic purposes to neutralize rust on tools, steel parts of mechanisms.
to contents ↑Rust exposure
The composition is able to create a protective film on the metal surface. After application, it destroys the oxide forms of iron, which is rust, transforms them into phosphates. Along with the participation of manganese, an alloying effect develops, while zinc is activated at the site of foci of electrochemical corrosion, eliminating them. The result is the emergence of a durable, reliable protective layer on metal products.
to contents ↑Release form and consumption rate
The product is available in the form of a liquid placed in small and medium packaging bottles with screw caps. This solution is intended for ordinary brush application, like paint. The capacity of the bottles is 60, 500, 1000 ml. Also, “Tsinkar” is sold in spray cans having a more convenient method of application by irrigation of products. For professional use, “Tsinkar” is produced in cans of 10 liters.
to contents ↑Consumption of the composition depends on the application method, the number of layers, the severity of existing corrosion processes. 110-340 g of the composition is consumed per square meter of the base.
Instructions for use
“Tsinkar” is easy to use for independent work with your own hands: they can paint metal like paintwork materials. Therefore, many car owners do not go to the MOT station to repair the car, but prefer to do the work themselves. Instructions for use must be strictly observed, otherwise the effectiveness of the product will seriously decrease.
Surface preparation and application of the transducer
Before painting, it is important to carry out preliminary activities. Without cleansing from loose rust, which is already freely separated, it is impossible to apply “Tsinkar”. For this purpose, you can use any methods: rub the product with brushes, abrasive products, sandpaper, clean with scrapers, knives, spatulas. It is best to purchase a special brush for metal, and for surfaces of considerable size - a grinder or drill with a nozzle. Old paint must be scraped off or washed off without fail.
Often, a precipitate forms at the bottom of the Tsinkar product, so it must be shaken well before use. Compositions in cylinders are sprayed without additional devices, for solutions in containers, cans, a small container, a brush, a roller will be required. Old surfaces are recommended to be pre-coated with a primer for metal in 1-2 layers.
After preparation, you can proceed to the main work. Apply the product, completely wetting the surface, allow the first layer to dry. After the appearance of a white or grayish coating, a stiff brush is passed over it to remove unreacted elements, then they begin to apply a second layer.
Each layer increases the protective qualities of the created anti-corrosion coating, enhances its physical and chemical properties. Usually, two treatments are enough, but sometimes it is necessary to perform 3-4 applications (if Tsinkar is used in important or wear-prone areas). Only one treatment can be performed to remove rust without the need for further metal protection.
Drying time
One layer of the composition dries on average 30-40 minutes. The exact time depends on the type of application and environmental conditions (this figure is typical for room air temperature). After drying, proceed to the final processing of the coating.
Do I need to wash off the “Tsinkar” after application
Dry the surface of the metal with a rag. Then proceed to washing off the composition. This must be done, only then the application efficiency will be high. Under the wash understand the removal of plaque created by drying the Converter. If this step is skipped, the metal will continue to rust under plaque.
Rinsing is done using a concentrated solution of soda ash, white spirit, silicone rinse. If you have a soft sponge, you can rinse the base with plain water, but without applying significant effort so as not to damage the film. After washing the product and drying it can be stained, if necessary. Typically, paint work is done to obtain a more presentable appearance of the structure.
Primer and body protection after applying the converter
To prevent the formation of rust in the future, it is recommended to strengthen the protection of the body or other products by priming (if painting is not planned). The primer is especially carefully applied to the area of welds and open areas regularly in contact with the environment. For soil, it is worth choosing high-quality tools for working on metal. Professionals perform such manipulations in special chambers. Do it yourself with a brush with your own hands.
to contents ↑How to increase the efficiency of use of the composition
In order for the result of metal processing to be more durable and high-quality, you need to follow these tips:
- Do not ignore the preparation of the base and the removal of rust deposits, removing even the smallest spots;
- Do not apply “Tsinkar” at high humidity and on wet products;
- Do not make the coating too thick;
- Do not forget to wash the solution with soda or other means.
Safety requirements
Subject to safety recommendations, “Tsinkar” will not cause problems during application and storage. Orthophosphoric acid is present in its composition - a combustible, flammable substance, so work should be far away from sources of heat, fire. In order not to harm health, it is necessary to ensure high-quality ventilation in the room, and all manipulations should be carried out in a respirator, gloves, protective clothing. If the composition gets on the skin, it is washed with soap and water, and if redness and pain appear, consult a doctor immediately.
Other recommendations for the use of the product:
- not allow heating above +55 degrees;
- store in a dark place out of the reach of children;
- strictly exclude contact with eyes and mucous membranes.
How to avoid possible failures
It happens that after applying the product, rust reappears. Most often the fault is non-compliance with the technology, which is described in detail in the instructions. For example, a spray can can go unevenly if kept from a distance of less than or more than 15-20 cm from the surface. Some people forget to shake the solution before work, why it can delaminate. When applying, the brush must be pressed firmly to the base so that the treatment is more thorough and there are no unpainted spots.
to contents ↑Advantages and disadvantages of Tsinkar
The tool has a lot of advantages, and one of them is the ability to apply it to a wide range of products, ranging from a variety of vehicles and ending with household appliances and complex structures. Other benefits are:
- convenience and ease of application;
- reasonable price and low consumption;
- the presence of the composition in containers of different sizes;
- the possibility of processing hard-to-reach areas, hidden cavities with the help of a composition in the form of a spray;
- lack of harmful influence on elements and details;
- high efficiency against rust and for the prevention of its appearance in the future.
to contents ↑The disadvantages of the tool also have. The instructions for its application must be strictly observed, otherwise the proper result cannot be achieved. The composition is suitable only for an early and medium degree of metal damage by corrosion, and with severe destruction it is better to use welding. The composition is toxic, and it is necessary to work with it carefully, observing personal protective measures.
Application result
Tsinkar is considered one of the most effective rust converters. When applied, surface corrosion sites literally dissolve with the transition of oxides to phosphates. A protective zinc-manganese film is also created on the metal, which protects the product from further rusting.
User reviews
Most of the reviews are positive, users note complete rust removal and excellent metal protection in the future:
“I worked with the Tsinkar tool on the old wheels. The rust melted right before our eyes, and immediately an even matte finish appeared. Now I will always apply the composition, if necessary, it should be available for every car owner. "
“I have been using Zincar for several years, I am getting rid of rust on the back of an old car with it. After application, hissing is observed, bubbles go, and the rust disappears.Unfortunately, I have to repeat the processing several times a year, but it suits me, because the expense is minimal. "
“If you start the part so that the rust layer is too thick, Zincar will not help, but it will still work to stop the corrosion. It’s better to apply it on time, without waiting for serious problems, while applying in 2-3 layers, then the effectiveness will be higher. "
